Smiley Electric

Electrician in Portland, OR

Portland has the oldest housing stock in the metro, and that shapes almost every electrical job inside the city. Smiley Electric is the licensed Portland-metro contractor that reads your home's wiring correctly and pulls the permits the city requires.

MBE Certified · ESB Certified · Licensed & Insured

Oregon CCB #2271164.7★ · 66+ Google reviews

Electrical work in Portland homes and buildings

Roughly a quarter to a third of Portland's housing units were built before 1940, close to double the national average. The dominant older forms are the late-1880s Victorians on the inner east side and, especially, the 1905–1915 wave of Craftsman bungalows and Four-Squares that fill Laurelhurst, Irvington, Sellwood-Moreland, Alberta Arts, Hawthorne, and Buckman. That era comes with predictable electrical realities.

Homes built before the 1950s are the highest-probability candidates for knob-and-tube wiring, which has no ground wire and brittle cloth-and-rubber insulation and is a recognized fire hazard. Most Oregon insurers will not write or renew a policy on a house with active knob-and-tube, often giving owners only 30 to 90 days to remediate. Many older homes also still carry outdated fuse boxes or hazard-flagged panels, and their original 60-amp or 100-amp services are undersized for heat pumps, EV chargers, induction ranges, and ADUs.

Portland runs its own delegated municipal electrical program: the city, through Portland Permitting & Development, both issues residential electrical permits and performs the inspections itself. A residential electrical permit requires three city inspections: rough-in, service, and final. The final one has to pass before the permit closes. We handle that paperwork and those inspections as part of the job.

Panel upgrades and hazard-panel replacement

The most common call we take in Portland's older neighborhoods is the panel. If your home still has an outdated fuse box or an undersized 60A/100A service, upgrading to a modern 200A panel makes room for today's loads. We also replace the two panel types insurers increasingly refuse to cover, the Federal Pacific Stab-Lok and Zinsco panels, both recognized fire hazards because their breakers can fail to trip on an overload or short. Our full electrical panel upgrade service for Portland is licensed, permitted, and inspected end to end.

Knob-and-tube rewiring, EV chargers, and generators

For pre-1940 homes across the inner eastside, knob-and-tube replacement is often not optional. It is what your insurance company is asking for in writing. We remove the old ungrounded runs, bring circuits up to current code, and give you the documentation to hand back to your insurer.

Oregon is a top state for EV adoption, with roughly one in seven new cars sold in 2024 being electric. A Level 2 charger needs a proper load calculation against your existing service, and older homes often need a panel or service upgrade first; our EV charger installation covers the load math, wiring, and permit. The Portland region is also prone to winter ice storms and windstorm outages, so a properly installed standby generator keeps your heat, refrigeration, and essential circuits running.

Remodels, troubleshooting, and emergencies

Remodels are where good wiring earns its keep. That might mean modernizing a bungalow kitchen, adding LED and fixture lighting, or wiring a hot tub with the dedicated GFCI-protected circuit a spa requires.

Some calls can't wait: a breaker that keeps tripping, lights flickering, an outlet not working, a burning smell, or half the house losing power. Our troubleshooting and repair service tracks the fault to its source. For urgent situations we offer emergency electrical service, and we handle commercial electrical work for offices, shops, and multifamily buildings.

Why Portland homeowners call Smiley Electric

Smiley Electric, Inc. is owned by Joshua Smiley, a Master Electrician, working under Oregon CCB #227116, licensed and insured. That license matters: for ADU electrical work, Portland requires a licensed electrical contractor and separate trade permits, and homeowners are not allowed to self-perform the electrical. We pull the city permits, schedule the inspections, and leave you with the record that makes a home sale, refinance, or insurance renewal go smoothly. We give a clear, upfront quote after we understand the scope, keep the job site clean, and treat your home with respect.

We work throughout the city and metro, including Laurelhurst, Irvington, Sellwood-Moreland, Eastmoreland, the Alberta Arts District, Hawthorne and Sunnyside, Buckman, Alameda, Grant Park, St. Johns, Ladd's Addition, and Kenton. Portland recognizes 95 official neighborhoods, and we serve homes and businesses across all of them plus the broader metro. Most work happens right at your location. We are open Monday through Saturday, 7am to 5pm; call us to book.

Portland electrical questions, answered

My Portland insurer flagged knob-and-tube wiring. What now?

That is common here. Many Portland homes built before the 1950s still have active knob-and-tube, which has no ground wire and is a recognized fire hazard, so most Oregon insurers will not renew a policy until it is remediated, often within 30 to 90 days. We replace the old runs, pull the city permit, and pass inspection, giving you the documented record your insurer needs to keep your coverage in place.

Do I need a permit for a panel upgrade in Portland?

Yes. Portland runs its own municipal electrical program through Portland Permitting & Development, which both issues the permit and performs the inspections. A residential electrical permit takes three inspections, rough-in, service, and final. The final has to pass before the permit closes. We pull the permit and schedule those inspections for you as part of the job.

Why do so many older Portland homes need a panel upgrade?

Portland has the metro's oldest housing, with roughly a quarter to a third of homes built before 1940. Those homes often still have fuse boxes or hazard-flagged panels like Federal Pacific Stab-Lok or Zinsco, whose breakers can fail to trip on an overload. Their original 60-amp or 100-amp services are also undersized for heat pumps, EV chargers, and ADUs, so a 200-amp upgrade is frequently the fix.

Can I install my own EV charger or do my own ADU wiring in Portland?

Oregon leads in EV adoption, and a Level 2 charger needs a real load calculation against your service, so many older homes need a service upgrade first. For an ADU, Portland requires a licensed electrical contractor and separate trade permits; homeowners are not allowed to do ADU electrical themselves. In both cases we handle the calculation, the wiring, and the permit correctly.

Which Portland neighborhoods does Smiley Electric serve?

We work across the whole city and metro, including Laurelhurst, Irvington, Sellwood-Moreland, Eastmoreland, Alberta Arts, Hawthorne, Buckman, Alameda, Grant Park, St. Johns, Ladd's Addition, and Kenton. Portland recognizes 95 official neighborhoods, and we serve homes and businesses across all of them. Most work happens right at your location.

How much will my Portland electrical job cost?

We give a clear, upfront quote after we understand the scope of the work. Every home and panel is different, so we look at your actual wiring, service size, and what the job requires before we put a number to it. There are no surprises. Call us and we will set up a visit.

Call and talk to the electrician, not a call center.

Talk to a licensed electrician today. Free ballpark by phone, and a firm quote on the visit before any work begins.

Call (503) 484-7556Mon–Sat, 7am–5pm

Or request a callback

We call back during business hours, Mon–Sat, 7am–5pm.

Call (503) 484-7556Get a callback